Mon. Feb 6th, 2023

6 Tips for Properly Using a High Pressure Washer

We’ll show you 6 ways to use this powerful cleaning tool, whether you’re doing Pressure Cleaning yourself or hiring a professional. This guide will help you create beautiful surfaces on your property.

These Safety Measures Should Be In Place

High pressure washers are incredibly powerful pieces of equipment. It can damage windows, strip paint, or even cause holes in bricks if not used correctly.

High-pressure washers can cause injury or even death. A man from New South Wales fell while using a washer.

It is therefore sensible to always perform the following safety tasks

The safety manual is essential. This will give you all the information you need about the equipment and how you can troubleshoot it.

Protective clothing is recommended. Wear no thongs, boardies or other revealing clothing. If you don’t have them, safety goggles, gloves, and steel-capped boots will be required to protect your eyes.

Do not use a ladder when using pressure washers. If you are standing on a ladder, inertia could cause you to fall and result in serious injury.

Organize your surroundings. Close all doors and windows. All slip- and trip hazards must be removed. If possible, sweep away any debris. Keep your pets and children away from the area.

Pick The Right Sprayer Nozzle

Depending on which pressure washer you choose, you may have a single variablenozzle that you can adjust from zero to sixty degrees.

Many come with coloured spray nozzles, which can be coded to the power pressure of each job. You’ll need to change the nozzles from one job to another.

  • Black –this pressure is for detergent application.
  • White (40deg). –a gentle spray that is reserved for windows and other fragile surfaces. It is ideal for cleaning your house exterior.
  • Green (25deg). –a strong pressure, but is common for home use. It is suitable for outdoor furniture, driveways, decks, and cars.
  • Yellow (15deg). –stronger water pressure that you would use to remove mildew or paint. It is also useful for tougher grime and hard surfaces.
  • Red (0deg).this is your toughest pressure. This is a great way to remove the most stubborn stains from concrete or metal. Red should not be used for wood.

Home

Plan A Wash Schedule

You shouldn’t use your high pressure washer without having a plan. A schedule can help you cut down on the amount of detergent, petrol, and water that is being used to wash your washer.

Wash your hands:

  • Vinyl siding should be replaced every 2 years
  • Your wooden deck once a year
  • Concrete driveways should be cleaned once a year.
  • Every three years, you should inspect your stone and brick footpaths. Before you adjust, start cleaning from a wide angle.

This tip is especially important if you are pressure washing a surface for the first-time.

Start the wash by holding spray approximately 60-90 centimeters from the surface. You don’t need to make any adjustments if this does the trick.

You can move the spray closer if it isn’t cleaning it. However, it should not be closer than 15 cm. If it is still not clean at this distance, you can use a stronger nuzzle.

These Steps Are For Pressure Washing Your Car

High pressure washers can be a great way to wash your car thoroughly. It is important to not use a high pressure washer as it can cause damage to the paint and crack the windows.

The best washer is one between 1,200 to 1,900 PSI, such as the HTMLWAVE Hot Pressure Cleaner Smart.

Start by washing your car using plain water and a low-pressure nozzle (such the green 25degnozzle).

Use a brush to scrub the exterior of your car, and then rinse it from the top. Do not spray your engine bay.

Vinyl Siding Should Be Washed With Care

It’s best to use a low pressure washer to clean vinyl siding.

Dirt and sediments are not what you want to see coming out of the jetter’s tip at high pressure. Water filters keep dirt, grit and other deposits from getting into the water pump. This can cause blockages and clogs. These sediments can cause safety issues if they blow through the spray tip. A blocked water filter can also cause water shortages. Regular inspections are necessary to clear the water filter.

Final Words:

To prevent any debris from seeping into dry areas or creating dirty streaks, apply soap from the top to the bottom.

You should not let the detergent dry. However, you should allow it to sit on your siding for a few moments. Do not wash the siding surface directly in sunlight.

After the washer is done, turn up the nozzle to a higher setting (between 25deg and 40deg). Hold the washer 45cm away from the siding (bottom down) before you rinse.

high-pressure washer is a great way to clean different surfaces. However, it’s important that you properly use the equipment. Get in touch with Jetwave Group to ask any questions.

For More Interesting Articles Visit uwatchfreeusa.com

 

Leave a Reply

Your email address will not be published. Required fields are marked *

Categories